Let’s Talk Real Numbers for Gate Lock Service in Burbank
We get this question almost daily from homeowners across Burbank — from the hillside properties near Brace Canyon Park to the flat-lot homes along Glenoaks Boulevard: “How much is it going to cost to get a proper lock on my driveway gate?”
Fair question. And we’re going to give you a fair answer instead of the usual “it depends” runaround.
Average Cost Range for Gate Lock Service
For most residential driveway gate lock jobs in the Burbank area, you’re looking at $120 to $350 for a standard installation. That covers the lock hardware, labor, and a basic setup on a swing or sliding gate.
If you need a high-security deadbolt, a commercial-grade mortise lock, or integration with an electric gate opener, the range shifts to $275 to $600+ depending on the hardware and complexity.
Here’s a quick breakdown:
- Basic gate latch replacement: $85 – $150
- Standard keyed gate lock install: $120 – $280
- Heavy-duty deadbolt for iron/steel gate: $200 – $350
- Electric gate lock with keypad or remote: $300 – $600+
- Emergency/after-hours service: Add $50 – $100 to any of the above
These are the numbers we regularly quote for jobs around the Magnolia Park neighborhood, the Rancho area, and throughout the 91501, 91502, 91504, and 91506 zip codes.
What Pushes the Price Up or Down
Gate Material
A wrought iron gate along a property on Screenland Drive takes different hardware and drilling than a wooden privacy gate in the residential streets off Olive Avenue. Iron and steel gates usually cost a bit more because the metalwork requires specialized bits and more time.
Lock Type
A simple latch-style lock is the cheapest option. A double-cylinder deadbolt costs more but gives you serious security. Electronic locks with keypads or smart features are the premium tier. We’ll always recommend based on what your gate actually needs — not the most expensive option on the shelf.
Gate Condition
If your gate is sagging, misaligned, or has rust damage around the latch area, we might need to do minor prep work before the lock goes in. A gate that doesn’t close flush won’t hold a lock properly, and we’re not going to install something that fails in a week. If the gate itself needs attention, we’ll let you know upfront — and you might want to check out our page for related work.
Time of Service
Our regular daytime rates are the numbers listed above. If you call us at 11 PM because someone tried to force your gate open on your property near the Chandler Bikeway, we’ll be there — but there’s an after-hours premium. That’s standard across the industry.
The Step-by-Step Process: What Actually Happens
Here’s exactly what to expect when you book a gate lock service in Burbank with our crew:
1. You Call, We Ask Questions
We’ll ask about your gate type (swing, sliding, pedestrian), material (wood, iron, aluminum), and what’s currently on it. This helps us show up with the right hardware instead of making a second trip.
2. On-Site Assessment
Our tech inspects the gate, checks the alignment, measures the stile width, and confirms which lock fits best. You get a firm quote before any work starts. No surprises.
3. Installation
For a standard keyed lock, this takes 30 to 60 minutes. We drill or mortise the gate, install the lock body, align the strike plate or receiver on the post, and test it repeatedly. For electronic locks, add another 20–30 minutes for wiring and programming.
4. Testing and Handoff
We test the lock from both sides, make sure the gate swings or slides without binding, and hand you all keys or codes. We also walk you through basic maintenance — a two-minute conversation that’ll save you money down the road.
Should You Get a Gate Lock or Something Else?
Sometimes people call us for gate lock service and the real answer is different. Here’s how to think about it:
- Get a gate lock if your driveway gate currently has no lock, has a broken one, or uses a flimsy latch that anyone could pop open. This is the most common scenario we see on residential streets near Downtown Burbank and in the neighborhoods between Victory Boulevard and the 134.
- Get a full gate lock upgrade if you already have a basic lock but want keyed or electronic access — especially if you have a rental unit or ADU with shared driveway access.
- Consider a different approach if your gate is severely damaged or rusted through. Putting a great lock on a failing gate is throwing money away. We’ll tell you that honestly.
For more information on everything we handle across the city, check out our full Burbank locksmith services page.
Why Homeowners in Burbank Call Us for This
Burbank has a mix of property styles — 1940s bungalows with original iron gates in the Magnolia Park area, newer builds near the Empire Center with aluminum fencing, and hillside homes off Country Club Drive with long driveways and heavy gates. We’ve worked on all of them. That local experience means faster installs and fewer callbacks.
We’re mobile, we carry stock for the most common gate lock types, and we quote before we start. That’s the whole pitch.
If your driveway gate needs a secure lock and you want a straight price and professional install, give the Locksmith HQ Team a call at (818) 398-9391. We’ll get it handled.
